Air Compressor LS20

SKU : Air Compressor LS20

JAGUAR screw Air Compressor with built-in Dryer and Filter

• Low RPM
• Permanent Magnet Motor
• VSD Control
• Grade 1 of National Efficiency Standard
• Compact & Integration Design
• Special design for laser cutting machine

The advantage of IE4 permanent magnet motor

Permanet magnet VSD motor conforming to IEC 60034-30-2008. Assured by professional certification authority.

Technical Data Sheet Model LS-20

• Discharging Pressure (Mpa) : 0.8 Discharging Volume (m³/min) : 2.4 Power (kW/HP) : 15/20 Noise dB(A) : 62±2 Lubricant Capacity (L) : 10 Tank capacity (L) : 380 Weight (Kg) : 552 Overall Dimensions (L*W*H mm.) : 1750x750x1700
• Discharging Pressure (Mpa) : 1.0 Discharging Volume (m³/min) : 2.0 Power (kW/HP) :15/20 Noise dB(A) : 62±2 Lubricant Capacity (L) : 10 Tank capacity (L) : 380 Weight (Kg) : 552 Overall Dimensions (L*W*H mm.) : 1750x750x1700
• Discharging Pressure (Mpa) : 1.25 Discharging Volume (m³/min) : 1.7 Power (kW/HP) :15/20 Noise dB(A) : 62±2 Lubricant Capacity (L) : 10 Tank capacity (L) : 380 Weight (Kg) : 552 Overall Dimensions (L*W*H mm.) : 1750x750x1700
• Discharging Pressure (Mpa) : 1.5 Discharging Volume (m³/min) : 1.5 Power (kW/HP) :15/20 Noise dB(A) : 62±2 Lubricant Capacity (L) : 10 Tank capacity (L) : 380 Weight (Kg) : 552 Overall Dimensions (L*W*H mm.) : 1750x750x1700

JAGUAR Compressor LS20

Laser cutting is a technology that widely used in laser processing. Laser cutting machine use common economical and practical processing method.

The auxilliary gas is an in dispensable substance in the laser cutting process.

There are three main auxiliary gases : oxygen, nitrogen, and compressed air Compressed air is more accessible to obtain than oxygen and nitrogen, and the price is low compared with oxygen and nitrogen.

The cutting efficiency is as good as nitrogen.

It is common to use compressed air as an auxiliary gas for cutting.

Jaguar's screw compressor for laser cutting integeates a compressor, air tank, line filter, air dryer.

It easy for installation and can provide constant and clean compressed air. Ideal for laser cutting machine

At present, laser cutting machine that require compressed air above 1.6 Mpa mainly use the piston air compressor, piston-type air compressed air relatively easy to obtain high pressure.

But piston air compressors are noisy,have many wearing parts, and high oil content. It is recommended to ues screw air compressors below 1.6Mpa.

JAGUAR screw air compressor takes permanent magnet VSD technology, whick can maintain the stability of the air supply pressure and ensure the best cutting effect.

With the development of laser cutting machine power